Budgit Electric Hoists

Cut-a-Way Explanation

1. High torque, heavy duty hoist motor. A thermal cut-out is imbedded in the field windings to prevent coil burnout.
2. Hoists are available in either hook or lug suspension. Hook suspension permits portability of the hoist while lug suspension reduces headroom and can be used with any of our rigid-mount trolleys.
3. Motor brake is a 150% torque, DC rectified, short stroke, spring set disc brake for positive braking action and long life with minimal maintenance.
4. Load sprocket is provided with a full floating chain guide that assures proper engagement of chain on sprocket.
5. All gearing is totally enclosed and oil-bath lubricated for long life.
6. All hoists are provided with mechanical load brake and Manguard overload protection. The load brake provides load lowering control and a backup for the DC disc motor brake. Manguard prevents lifting loads beyond the hoist's load range which may damage the hoist.
7. The contactor is located under a easily removable cover.
8. The hoist frame and housing are constructed from light-weight, rugged aluminum alloy. Housing is precision machined for accurate gear and bearing alignment.
9. All hoists are provided with an upper and lower control circuit limit switch.
10. Hoists are available in either roller or link chain.
11. The lower block is provided with a 360 degree rotating hook riding on thrust bearings. As standard, the hook is provided with a spring loaded latch.

Specifications:

• Capacity Range: 1/4 thru 3 tons
• Lift: 10 feet standard, additional lifts available
• 5 to 64 feet per minute
• AC Power Supply: 115/230-1-60, 230/460-3-60, 208-3-60, 575-3-60
• Control: Push-button control voltage of 115V standard
• Suspensions: Hook and Lug